, ,

K1 | Heretic Star Destroyer

£56.80

SKU: SHH101 Categories: , ,

The Star Destroyer was commissioned by the Engineering Corps in M31.040 as a prototype mobile mining carrier designed to harvest dead planets. The main cannon was capable of cracking open planetary mantles, exposing valuable minerals underneath. The ship, crew and accompanying escorts disappeared in a freak warp storm during its shakedown cruise. The ship appeared in its corrupted form 500 years later, overhauled and equipped with all kinds of infernal weaponry. However the vessel was never designed to be a warship and is woefully underpowered in the maneuvering department, making it vulnerable to flanking attacks. It now serves as the flagship of Vice Admiral Stukov, an infested Terran.

Set includes the following:

  • Star Destroyer main body
  • 2x Richelieu L Turret
  • Rear Armour L, Rear Armour M
  • 6x Heretic weapon modules
  • Diagonal Spire L x3
  • Keel L x4
  • Prow option
  • Bridge option x2

Ship Length: ~14cm (5.5″)

Weight 0.020 kg
Dimensions 14 cm
Prow

Standard, Jaeger X

Rear Bridge

Dome M, Mech Tower, Pipe Organ, Turret Platform, Asymmetric Crane, Eye of Behelit, Heretic Symbol, Tsar Bridge, Pegasus half bridge, Pre-Imperial half bridge, Cyclops, Bridge M, Spinal gun S, Chimaera, Turret – Richelieu L, Turret – Yamato L (3 barrel)

Front Bridge

Dome M, Mech Tower, Pipe Organ, Turret Platform, Asymmetric Crane, Eye of Behelit, Heretic Symbol, Tsar Bridge, Pegasus half bridge, Pre-Imperial half bridge, Cyclops, Bridge M, Spinal gun S, Chimaera, Turret – Richelieu L, Turret – Yamato L (3 barrel)

Rear Weapon

Flak Turret, Hangar, ICBM Launcher, Octa Turret, Plasma Turret, Triple Broadside, XL Sponson

Mid Weapon

Flak Turret, Hangar, ICBM Launcher, Octa Turret, Plasma Turret, Triple Broadside, XL Sponson

Front Weapon

Flak Turret, Hangar, ICBM Launcher, Octa Turret, Plasma Turret, Triple Broadside, XL Sponson

Manufacturer:
Manufacturer in the sense of the General Product Safety Regulation (GPSR): Battlefleet Galaxy
Manufacturer address: Unit 4, 9 Crossley Street, Halifax, HX1 1UG, Halifax, United Kingdom
Manufacturer email: support@battlefleetgalaxy.com

EU Representative (GPSR):
EU representative for the General Product Safety Regulation (GPSR): Simon Saier
EU representative address: Bichler Str. 4a, 82377 Penzberg, Germany
EU representative email: eu@battlefleetgalaxy.com

This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light.

Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave “scars” on the model. These are production-related and do not represent a defect in the product.
Support structure might still remain on the model and can be removed with a sharp hobby knife.

Resin dust is a health hazard if inhaled into the lungs. Grinding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper.

It’s possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty.

Resin heat-sensitive and can therefore deform during the printing process, during the removal of the support structures or during curing. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position.

Important notice
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.

You may also like…