, , , ,

M4 | Grand Cruiser

£35.50£38.30

SKU: SHA113 Categories: , , , ,

A heavily gunned M4 chassis variant that was phased out as the Imperial Navy transitioned to the workhorse M4 Cruiser. The Grand Cruiser outmassed the M4 Cruiser by a factor of 1.35x, however the Navy found it increasingly difficult to source the powerful Elliptic thrusters, leading to their untimely retirement.

Now, they are a rare sight even in Core Systems, stationed in battlefleets supported by numerous auxiliaries.

Discover more photos on Instagram – James Woodford, John Wedge, Painting.Potatos


Note:

The kit includes a standard Imperial Keel as part of the package due to popular demand.

Ship Length: 10cm (3.9″)

Can be shipped in large envelope

Weight 0.02 kg
Dimensions 10 cm
Prow

[01] Broadleif L, [02] Jaeger L, [03] Grand M w/ Adaptor, [04] Marder L, [06] Malice L, [08] [Marine] Hammerhead M w/ Accessories, [08] [Marine] Crusader M w/ Accessories, [09] Anvil M, [10] Bearded Axe L, [11] Legacy L, [12] Knight L, [13] Classic M w/ Adaptor, [14] Schmal Jaeger M w/ Adaptor

Imperial Weapons

Thick Sponson S, Thick Hangar, Thick Broadside, [SL] Sponson L, [SL] Sponson S, [SL] Quad Broadside, [SL] Hex Broadside, [SL] Twin Turret Bay, [SL] Hangar, [SL] Barrage Broadside, [SL] Richelieu Sponson (+£2.80), [SL] Yamato Sponson (+£2.80), [LOG] Repair Bay (+£1.80), [LOG] Gas Condenser, [LOG] Triple Canister, [LOG] Container, [LOG] Docking Bay (+£1.80), [LOG] Drop Pod L (+£1.80), [LOG] Drop Pod S

Heretic Weapons

[01] Hangar, [02] ICBM Launcher, [04] Plasma Turret, [06] Triple Broadside, [07] XL Sponson, [08] Flak Turret, [09] Octa Turret [09], 8x Mk.3 Turrets

Front Bridge

[0] Church, [0] Cathedral, [0] Richelieu Turret, [0] Yamato Turret, [01] Eagle Statue, [01] Pre-Imperial Half Bridge, [03] Turret Platform, [04] Nagato, [04] Skull Statue, [05] Eagle Gun, [05] Hooded Angel, [06] Flakturm Tower, [07] Dome M, [07] Lion Standing, [08] Invigil Symbol, [08] Pipe Organ, [10] Brazier, [11] Spinal Gun S, [12] Pegasus Half-Bridge, [13] Heretic Symbol, [14] Eye of Behelit, [14] Mech Tower, [15] Bridge M, [15] Wolf Statue, [17] Chimera Bridge, [18] Asymmetric Crane Bridge, [21] Tsar Bridge, [22] Legacy Bridge, [23] KGV, [24] Marine Pagoda

Rear Bridge

[0] Church, [0] Cathedral, [0] Richelieu Turret, [0] Yamato Turret, [01] Eagle Statue, [03] Turret Platform, [04] Nagato, [04] Skull Statue, [05] Hooded Angel, [06] Flakturm Tower, [07] Dome M, [07] Lion Standing, [08] Invigil Symbol, [08] Pipe Organ, [10] Brazier, [11] Diagonal Spire, [13] Heretic Symbol, [14] Eye of Behelit, [14] Mech Tower, [15] Bridge M, [15] Wolf Statue, [18] Asymmetric Crane Bridge, [21] Tsar Bridge, [22] Legacy Bridge, [23] KGV

Rear Armour

[05] Plating M, [06] Curved M, [08] Gothic M

Rudder

None, Standard M, Marine, Crusader, Parapet, Missile Pod M

Manufacturer:
Manufacturer in the sense of the General Product Safety Regulation (GPSR): Battlefleet Galaxy
Manufacturer address: Unit 4, 9 Crossley Street, Halifax, HX1 1UG, United Kingdom
Manufacturer email: support@battlefleetgalaxy.com

EU Representative (GPSR):
EU representative for the General Product Safety Regulation (GPSR): Simon Saier
EU representative address: Bichler Str. 4a, 82377 Penzberg, Germany
EU representative email: eu@battlefleetgalaxy.com

This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light.

Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave “scars” on the model. These are production-related and do not represent a defect in the product.
Support structure might still remain on the model and can be removed with a sharp hobby knife.

Resin dust is a health hazard if inhaled into the lungs. Grinding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper.

It’s possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty.

Resin heat-sensitive and can therefore deform during the printing process, during the removal of the support structures or during curing. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position.

Important notice
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.

You may also like…